Luscan Group

Peristaltic pumps Z-PE 

Description

Peristaltic pumps have the most gentle movement of wine/must pumps. Thanks to the coupling to the hopper (optional) is possible to transfer mash consistency fluids, dregs, destemmed grapes and other alimentary products. The type or work assure a linear pumping, limited squashing and a complete absence of product heating. Rubber hose is compressed by rotating aluminum rollers mounted on bearings for minimum friction. The rubber hose is lubricated at the factory with food grade lubricant and does not need periodic lubrication. The machine is entirely manufactured in stainless steel, including the components not in direct contact with the pumped fluid.

 

Advantages and Characteristics:

  • Variable Speed Frequency Drive on all units. Local and Remote controls [forward/reverse, stop/start, and speed]
  • Self-priming till 7 mt. depth
  • Maximum exercise pressure of 6 bar (on request till 15 bar with vacuum system)
  • Reversible flow
  • The hose is lubrication-free. Food grade hose is lubricated during manufacturing and does not need periodic lubrication
  • Rotating aluminum rollers reduce friction and extend hose life
  • Pressure compensators on both inlet and outlet eliminate 'knocking'
  • Optional pressure switch
  • Optional hoppers for must/pomace. Choose between integrated and free-standing; Integrated hoppers connect directly to the pumps---inlet flange of pump is bolted to outlet flange of hopper. Stainless steel hopper and auger. Motor with gear reduction. Takes ~15 minutes to attach/remove the hopper
  • Optional vacuum for greater flow; particularly useful with must
  • Optional Dual Level Float control for hopper
  • Safety stop in case of rubber pipe damages/breaking
  • Easy cleaning with "C.I.P." cycles (clean in place)

 

dettaglio vuotostato DESCRIZIONE ITA

VACUUM CONTINUOS SYSTEM: Vacuum system increases the flow rate. It is particularly useful when pumping must or pomace. Must and pomace pumping rate can be increased up to 40% with this option. Vacuum also increases priming depth to 8 metres.

 

 

Zeta PE 30 Inverter 400x400     ZETA-PE50 tram 400x400

Optional version with loading hopper (Z-PE 50 e Z-PE 65)

 

  Z-PE 30 Z-PE 50 Z-PE 65
Pressure Max 6 bar Max 6 bar Max 6 bar
Production 30 - 150 Hl/h 30 - 150 Hl/h 70 - 250 HL/h
Fittings Ø 35 Ø 55 Ø 65

Hopper dimensions

860x420x920 mm 1150x560x1100 mm 1300x700x1300 mm
Weight Kg 105 Kg 155 Kg 195
Motor  Kw 1,5 Kw 3

Kw 4